| Random write (4kb): | 78000 |
| Random read (4kb): | 94000 |
| Ssd form factor: | 2.5" |
| Read speed: | 560 |
| Read latency: | 200 |
| Hardware encryption: | No |
| Interface: | Serial ATA III |
| Data transfer rate: | 6 |
| Weight: | 69 |
| Target workload: | Mixed Use (MU) |
| Memory type: | 3D TLC NAND |
| Ssd capacity: | 1920 |
| Operating temperature (t-t): | 0 - 70 |
| Operating vibration: | 2.17 |
| Storage temperature (t-t): | -40 - 85 |
| Country of origin: | China/Taiwan |
| Master (outer) case gross weight: | 989.98 |
| Master (outer) case height: | 69.85 |
| Depth: | 100.1 |
| Height: | 7 |
| Width: | 69.85 |
| Package depth: | 9.14 |
| Package height: | 184.15 |
| Package weight: | 91.2 |
| Package width: | 129.54 |
| Non-operating vibration: | 20 |
| Master (outer) case length: | 203.2 |
| Master (outer) case width: | 135.89 |
| Products per master (outer) case: | 10 |
| Power consumption (idle): | 1.3 |
| Power consumption (read): | 1.6 |
| Power consumption (write): | 3.6 |
| Mean time between failures (mtbf): | 2000000 |
| Write speed: | 530 |
| Hot-plug support: | Jā |
| Unit box height: | 0.01 |
| Summary: | Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation |
| Units per pallet: | Nav |
| Unit calculated volume: | 0.000257 |
| Vendor homepage: | https://www.kingston.com/ |
| Unit box length: | 0.185 |
| Component for: | Server/workstation |
| Model: | SEDC600M/1920G |
| Unit box width: | 0.13 |
| Ssd series: | DC600M |
| Unit calculated weight: | 0.099 |
| H/w plp function: | Jā |
| Write latency: | 30 |
| Power consumption (average): | 1.45 |
| Tbw rating: | 3504 |
| Use conditions: | Server/Enterprise |
| Units per shipping box: | 50 |
| Description: | Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for �mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers.
DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards.
Capacities available from 480GB–7.68TB* to meet your data storage requirements.
Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.
Hardware-based PLP Power loss capacitors to p |